1. Put the cartridge on some paper towels in an area where you can
tolerate a spill.
2. Peal off the top label.
3. Fill the syringe with
15ml. of black ink.
4. Very S-L-O-W-L-Y inject ink into
the hole closest to the copper strip. Any hole
will actually do, they all go
to the same sponge, but the first hole is closest to the
5. When finished leave
the top label off and the filling holes exposed (when printing it has to
pull in air).
6. Replace the cartridge and run 1 - 3 cleaning cycles as
per printer instructions.
Or print the following pages:
For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge.
On some of the newer Dell cartridges the filling holes are very small and
need to be drilled out larger so the syringe needle can enter the
A Refill Kit should include Ink plus
One 30cc Syringe
One Thumb Drill
Printer ink and Refill kits for your Printer