HP
Black Cartridge
#61 & #61XL
Refill Instructions
Instructions
1. Put the cartridge on some paper towels in an area where you can
tolerate a spill.
2. Peel off the top label.
3. Fill the syringe with 15 ml. of black ink.
(The XL version will take 25ml.)
4. Very S-L-O-W-L-Y inject ink into any
of the front three holes (they all go
to the same sponge). The back two holes is just an empty
space, don't use them.
5. When finished leave
the top label off and the filling holes exposed (when printing it has to
pull in air).
6. Replace the cartridge and run 1 - 3 cleaning cycles as
per printer instructions.
Or print the following pages:
http://www.refillinstructions.com/black.htm
for Black
For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge.
The cartridge will print just like a new one. Even though
the cartridge prints good, the ink level gauge will not read full after a refill.
A Refill Kit should include Ink plus
the following:
One 30cc Syringe

www.PrinterFillingStation.com
Printer ink and Refill kits for your Printer |