Refill Instructions

Epson T124, T125, T126, T127 Refillable Cartridges

1. Put the cartridge on some paper towels in an area where you can tolerate a spill.

2. Remove the Filling hole plug and the Clear vent plug to open up the vent hole.

3. Fill syringe with ink. (the cartridge will take approximately 14ml)

4. Insert the needle into the Filling Hole.

5. Very Slowly inject ink into the cartridge. Leave a small air space at the top of the cartridge.

6. Replace the Filling Hole Plug.

7. Install the cartridge into the printer and run 1 - 3 cleaning cycles as per printer instructions.
Or print the following pages:
http://www.refillinstructions.com/black.htm for Black
http://www.refillinstructions.com/color.htm for Color 

***VERY IMPORTANT***
ALL the cartridges provided MUST be installed in order for the system to work properly.
Your printer may have trouble recognizing the cartridges if they are not all installed together.
(DO NOT mix the refillable cartridges with other cartridges.)


Warning: - Never do a firmware update or a driver update on your printer. If your printer prints good now, it will not print even better after an update. The purpose of a firmware or driver update is to prevent your printer from accepting after market or refillable cartridges.
Printer manufactures don't want you to refill your cartridges, they want you to purchase your cartridges from them. If you use an after market cartridge or a refillable cartridge and then do a firmware or driver update your printer will give you a message that it does not recognize the cartridges and they will not work anymore.
A Refill Kit should include Ink plus a
Syringe
and blunt needle for each color.
Quality Inks for your Printer
www.PrinterFillingStation.com
Printer ink and Refill kits for your Printer