|
$9.95 each |
Epson Desktop Chip Resetter
Click here for Resetter
Instructions
This Chip Resetter Is For Epson
Desktop Printers. It Will Reset All Of Them (7 contact and 9 contact chips), But It Will Not Reset Wide
Format Epson Printer Cartridges. For The Wide Format Printers, Use the one
listed below.
Note: will not work on the new T124, T125, T126 and T127 cartridges |
Epson Desktop Chip Resetter
|
|
$15.95 each |
Epson T124, T125 T126, T127 Chip
Resetter
Click here for Resetter
Instructions
This Chip Resetter Is
For Epson Desktop Printers that use the T124, T125, T126 and T127
cartridges.
|
Epson T125/T127 Chip Resetter
|
|
$19.95 each |
Epson Wide Format Chip Resetter
If you have a wide or large format printer
then you need the chip resetter located here.
Click here
for Resetter Instructions
Wide Format Chip Resetter For Epson 4000,
4800, 7600, 7800, 9600, 9800, 10000, 10600 Printers.
Also Works on Wide Format Funnel Fill Cartridges |
Epson Large Format Chip Resetter
|
|
$12.95 each |
Canon Chip Resetter
Works on the PGI-5 and
CLI-8 cartridges
( will not work on the PGI-220 or CLI-221 cartridges)
Click here for
Video Instructions
or
Printed Instructions
This chip resetter is not necessary for
refilling your Canon cartridges, but will reset the ink level back to full. |
Canon CLI-8 Chip Resetter
|
|
$15.95 each |
Canon Chip Resetter
Works on the PGI-220 and
CLI-221 cartridges
( will not work on the PGI-5 or CLI-8 cartridges)
Click here for
Video Instructions
or
Printed Instructions
This chip resetter is not necessary for
refilling your Canon cartridges, but will reset the ink level back to full. |
Canon CLI-221 Chip Resetter
|
|
$19.95 each |
Canon Chip Resetter
Works on the PGI-225 and
CLI-226 cartridges
Click here for
Video Instructions
or
Printed Instructions
This chip resetter is not necessary for
refilling your Canon cartridges, but will reset the ink level back to full. |
Canon CLI-225 Chip Resetter
|
|
$1 / $2 each |
10cc (slip tip) Syringe w/needle -
$1.00 each
Ideal for Injecting Color Ink
30cc (slip tip) Syringe w/needle - $2.00 each
Ideal for Injecting Black Ink |
|
|
$1.25 each |
Thumb Drill - In case you don't have one or you lose the one that
came with your kit. It is a high speed tool steel drill embedded in a yellow wire nut. It
will drill through cartridges, no problem. It makes a hole about twice the size of the
needle so air can escape as ink goes in. This is our new, improved model.
|
Thumb Drill |
|
25¢ each |
Blunt Needle 18 ga 1½" Long
Made to attach to the Syringe |
Blunt Needle |
|
25¢ each |
Sharp Needle 18 ga 1½" Long
Made to attach to the Syringe |
Sharp Needle |
|
$1.25 each |
4oz HDPE Wide Mouth Bottle
Used in our Double Size
Refill kits also allows syringe access to ink after transferring from larger pint or
gallon container. Leak proof top. |
4oz Bottle |
|
85¢ each |
2oz HDPE Wide Mouth Bottle
Used in our Standard
Size Color Refill kits.
Leak proof top. |
2oz Bottle |
|
50¢ each |
Canon & Brother Set Screw - These are use on some
Canon
& Brother Cartridges to seal the fill hole air tight.
3-48 x 1/8 stainless steel set screw. The set screw will self-tap and form an
plug which can be removed and re-installed each time you refill. This is a
tiny set screw and can be used to seal a hole made by our Thumb Drill. |
Canon/Brother
Set Screw |
|
50¢ each |
Canon & Brother Allen Wrench - Used to insert and remove the
Canon or Brother Set Screw. |
Canon/Brother
Allen Wrench |
|
50¢ each |
HP Set Screw - These are use on some HP
Cartridges to seal the fill hole air tight.
10-32 x 3/8 stainless steel set screw. The set screw will self-tap and form an excellent
plug which can be removed and re-installed each time you refill. Only use a set screw
because it can be recessed below the surface of the cartridge. |
HP Set Screw |
|
50¢ each |
HP Allen Wrench - Used to insert and remove the
HP Set Screw. |
HP Allen Wrench |
|
20¢ each |
Black Rubber Replacement Ball (.160 dia) for HP
10, 11, 12, 38, 88, 940, 950, 951 Cartridges |
Black Ball
|
|
$1.00 each |
3½ inch Long Needle 18 ga - For filling HP 51641A and
HP C1823A color cartridges. It will reach to the bottom of the cartridge to help avoid the
creation of air pockets. VERY SHARP AND DANGEROUS, KEEP AWAY FROM
CHILDREN. DO NOT USE TO FILL HP 51645A OR 51640/51644/51650
CARTRIDGES. |
3½ inch Needle |
|
50¢ each |
Universal Inkjet Cartridge
Printhead Seal One size fits
all black and color inkjet cartridges
Air tight seal - Prevents inkjet cartridge printhead ink drying
Transparent see through inkjet seal
Apply to wet or dry inkjet cartridge nozzle plate
Quick application - no equipment needed
Click Here for Instructions |
Printhead
Seal |
|
12¢ each |
Cone Plug
Silicone plugs seal filling holes in your cartridge. Cone
shape, gives this plug ability to seal most of the filling holes. And soft
silicone guarantees secure sealing |
Cone Plug |
|
10¢ each |
Green Plug
Used to seal the filling hole in
Canon BCI-3e cartridges
Canon BCI-6 cartridges
HP 51645 cartridges |
Green Plug
|
$5.50 each
|
Snap & Fill Adapter
(comes with 30cc syringe & needle)
-
Used to fill HP 51626A and 51629A cartridges that don't have a fill hole on the top.
Normally the fill hole is on the right hand corner where a portion of a chrome or white
ball can be seen. If it is not there, you will need this tool to fill your HP 26A &
29A black cartridges.
See
instructions. |
|
Aluminum Tape
The Aluminum tape is very sticky and has a backing on it that is peeled off when ready
to use. This tape is good for sealing up holes air tight that were drilled into a
cartridge. It is also good to cover two of the color filling holes while refilling one
color.
$ FREE
Item # Atape
(not to be ordered alone) |
Aluminum Tape
( two inch square )
|
Printhead Cleaner
As a matter of function, inkjet printers will experience nozzle clogging and waste-ink
buildup on the print head surface resulting in streaking, incomplete lines and generally
poor quality printing. Clogging is normally caused by ink drying and solidification, or
bubbles in the nozzles of the printer. WJ800 Printhead Cleaner
is a dynamic, low-foam, high-viscosity fluid that is able to dissolve coagulated ink
deposits and puncture bubbles in printheads. Finely attuned with all OEM inks and
cartridges. Ideal for use in recycling operations that refurbish inkjet cartridges.
(This is for cartridges that have the printhead built into
the cartridge)
Item #
WJ800
Click Here for
Instructions |
Printhead Cleaner
|
Printhead Cleaner for Epson,
Canon, and Brother Printers
As a matter of function, inkjet printers will experience nozzle clogging and waste-ink
buildup on the print head surface resulting in streaking, incomplete lines and generally
poor quality printing. Clogging is normally caused by ink drying and solidification, or
bubbles in the nozzles of the printer. WJ807 Printhead Cleaner is a dynamic, low-foam, high-viscosity fluid
that is able to dissolve coagulated ink deposits and puncture bubbles in printheads.
Finely attuned with all OEM inks and cartridges. Ideal for use in recycling operations
that refurbish inkjet cartridges.
(This is for Brother, Canon, and Epsons or any other printer
that has the printhead built into the printer)
Item # WJ807
Click Here for
Instructions |
Epson,
Canon, Brother
Printhead Cleaner
|
